Rubbing compound is used as a component for renewing old paintwork. If you are concern about how to properly use a rubbing compound, this article is for you.
Rubbing compound will help you dispel anxiety when the car is scratched
Are you stressed about getting scratches on your darling car, even once you provide it careful protection? For most people, car scratch is uneasy, especially once you see that somebody else has deliberately damaged your most precious possession.
Furthermore, it could have many reasons for this trouble such as crashing into the tree, accident, and parking mischance.
The car’s outside could be ruined just by a tiny scratch on the covering, and this might make you feel moody for days. You can bring your baby car to an auto body store for getting a new coating of the overlay. That would be a good solution if you have a lot of money due to the cost of restoring is super expensive.
For that reason, by using a rubbing compound, your car will look new without spending lots of money. This method is efficient and cost-saving, which you could do by yourself.
Priority Tire’s New Year Sale! Save up to 25% OFF!
Valid through Jan 22, 2022
Available at PriorityTire.com
- The steps should be followed before applying rubbing compound
- Preparation done, then how can we use the rubbing compound?
The steps should be followed before applying rubbing compound
1. Preparing all the needed items
Keeping all the following necessary things ready means, you are all set to remove the scratch on your own.
You’ll need to buy a good quality rubbing compound, which is the abrasive material uses for grinding the damaged paint of the layer’s surface. It helps to bring your car’s charming back to life, acts as a magical!
You will use a wool pad to fix over an orbital polisher.
To perform a safe, you can choose the ultrafine dry or wet sandpaper, which can be found in any auto spare part shop.
Buffing machine or orbital polisher: this is noncompulsory. You can use it to support the scratches’ removal becomes easier.
Shoe polish: black or white
Soap water to get rid of dirt completely.
A dry towel uses for applying the compound and wax, to clean off the surface when done with rubbing compound and wiping off wax.
Car wax to provide a final ending.
2. Clear up the surface of your car
Clear up space which has the scratches before applying the rubbing compound
You need to clean space having the scratches before putting the rubbing compound on so that it could work effectively in this area. By a bit of extra effort, you could make the whole car surface clean.
Firstly, you have to clean the whole car covering by using soapy water. Then you use plain water to wash the covering. Next, you wipe it up with a dry cloth. Finally, you examine which areas of your car need to focus on removing scratches as well as evaluate the type of scratches.
3. Sanding down to the scratches layer
This step might not be needed if you have a small scratch or down to the metal scratch or chip.
A scratch couldn’t remove clearly due to it likes a mark on your vehicle. Therefore, the main target is to make the blemishes unseeable. To solve this problem, we are going to take off the neighboring paint until we enter the scratch layer. You can use sandpaper to achieve this goal.
It is unnecessary to sand down the part below a scratch. So what you have to do is using black or white shoe polish to wax over the scratches to make it noticeable.
Begin with putting sandpaper on the wooden chunk, spray water, and soap solution to smooth sand. Then, sanding the scratches with gentle strokes on 60-degree angles. Moving the sandpaper goes up and down to effect on sanding. You must follow all the previous steps until no contrasting mark exists.
Preparation done, then how can we use the rubbing compound?
Let’s take a closer look to know how to use rubbing compound after you have sanded (if needed) the surface, and everything is polished.
1. Applying the Rubbing Compound
Frame a wool pad in the heart of the orbital polisher. Then, use a slim layer of rubbing compound straight over the painted area of the scratches. You can find that most of the rubbing compound is made in a squeeze tube for using easily. You should use a tissue to get a few compounds and apply over the scratch when it’s in a can.
Perhaps the most effortless way to spray the rubbing compound is placing the orbital polisher into motion on the scratches. Don’t worry if you don’t have an orbital polisher, your hands would be a backup choice. The rubbing compound is applied by providing hard pressure and moving over with a dry towel through your hands.
2. Painting, Polishing, Waxing, and make it done!
Painting: When your car has a scratch going down to the metal, don’t worry, a touch-up kit and paint can help you overcome this problem. A chip or scratch will be unactive if it falls to the paint or metal. However, you can use just an application of a clear coat in case it falls to the pigment.
Polishing: After almost the rubbing compound is got rid off, you can get another wool pad for polishing the car’s covering.
Waxing: The importance of protection where you used the rubbing compound should also be considered. The wax paste can work effectively if you sanded. With a slight scratch, any kind of wax can go well.
Finally, step back, take a look, and enjoy your hard work!
The scratch parts will be clear away entirely if you have followed the mentioned steps properly. The light scratches can remove without much effort but with the deeper one, you might need some time as well as patience. In the worst situations, you can see them a little just when looking so close.
Nonetheless, it’s just a matter of learning experience, you can master the technique as you learn to use a rubbing compound. If you successfully achieve the above steps, you will become more confident at the work that you did on your own. And above all, you can enjoy the new coat of your darling car.